07711 031164 Get a quote

Get a quote

Tell us what needs doing and where. Send a photo on WhatsApp, call, or use the form below, and Switch Smart will come back to you.

  • Based Sandhurst GU47
  • Quotes In writing
  • Work Domestic and commercial
Go to the enquiry form

Enquiry form

Tell us about the job

A postcode and a sentence or two is plenty to start. Leave a phone number if you would rather we called.

So we know where the job is.

What needs doing, which rooms, and anything you have noticed. Photos are easiest on WhatsApp afterwards.

Your details are used to reply to this enquiry and, if you go ahead, to do the work. See the privacy notice.

Photos

What to photograph

A good photo of the fuse board answers most of the first questions: what kind of board it is, how many circuits there are, and whether it has RCD protection.

For a fault, add the socket, switch or fitting itself, and the board with the tripped device showing.

For something new, such as an EV charger, outside lights or extra sockets, add where you want it and the route back to the board.

Send it on WhatsApp

Example A useful photo of the board

What a useful photo of the fuse board showsA camera viewfinder framing a consumer unit with its door open. The whole board is in the frame, the circuit chart inside the door is visible, the labels on the devices can be read, and the cables coming into the board are in the picture. A B C D
  1. AThe whole board, door open. Step back far enough to get all of it in.
  2. BThe chart in the door, or whatever labels there are.
  3. CThe devices, close enough that the ratings on them can be read.
  4. DThe cables going in, and the meter if it is next to the board.
Fig. 1A modern consumer unit, framed the way a useful photo frames it. An example, not to scale.

Registration and standards

  • Scheme NAPIT registered Registered electrical installer
  • Licence 3889228 TrustMark Check the register
  • Standard Work to BS 7671 The IET Wiring Regulations
  • Building Regulations Part P notified Notifiable work reported to building control